C-863 installation manual
- Before start check if cables has enough space for free moving, then (move mouse over the images to see instructions):
1: The first PI controller is connected via USB. The subsequent controllers via RS232. To assign the controllers, the DIP switches should be set correctly, see page 68-71 (76-79 in pdf pages) in the File:C863 controller manual.pdf
2: From the START menu choose START -> All Programs -> PI -> PIMikroMove(R)
3: If PIMikroMove software is open, please close all connection for start from scratch.
4: If table position has a limit level, please move a little bit.
1: From the menu choose Connection -> New
2: Select the right model (C-863) and select the USB Daisy Chain menu. Press Scan button for update PI controllers which connected to the PC.
3: Choose the first controller and press Connect button.
4: Form the Stage database entries choose M-521.DD (or the model you need) and press Assign button. Press OK button.
5: Press Automatic button.
6: Press Switch on servo button.
7: Press Start button.
8: If everything is OK, you will see this window. Otherwise, check power, connections... and repeat.
9: Press Close button.
10: For the second, third, ... controller, choose Connection -> New and repeat the steps above.
1: For set min or max position for the axis choose one of the controllers -> Start up axes.